News

Over the past couple of years, one thing has become pretty clear when working on projects — the use of Cf8m Valve Body is gradually increasing. In applications involving corrosive media, such as chemical processing or seawater systems, ma...

In low temperature projects, specifying LF2 is usually the starting point, but in practice, performance depends on more than just the material. The LF2 forged steel ball valve is widely used because LF2 has good impact toughness at low temperatures, bu...

In high temperature service, things don’t usually fail right away. Most of the time, the system runs fine at the beginning, and then small problems start showing up after some time. Quite often, it comes back to how the high temperature autom...

In our daily work, the term ASME B16.34 valve body comes up quite often. Most of the drawings we receive from overseas customers will mention this standard directly, so it’s something we are already used to dealing with. From a practical point...

In many projects, problems don’t show up during testing. They show up after the system runs hot for a while. Once temperature goes up, some valves start leaking, torque changes, or the actuator reacts slower than expected. That’s usuall...

If you have been working with valves for a few years, you will probably notice one thing — more and more projects are asking for forged valve body instead of cast ones. It’s not something that changed overnight, but it’s definitely ha...

In many valve assemblies the stem does not attract much attention. Most discussions usually focus on the valve body or the sealing design. In practice, however, the stem is the part that moves every time the valve operates. The torque from a handwh...

✔In stainless steel valve manufacturing, material selection is always an important step. Many industrial valves used in chemical plants, offshore pipelines, or processing systems require good corrosion resistance. Because of this, the CF8M valve body i...

In the past two years, more and more customers have started to use triple eccentric butterfly valves instead of traditional butterfly valves or some gate valves and globe valves in oil and gas, LNG, energy power stations and marine pipeline projects. The...